We have CNC turning capability with our Prodigy gang chucker with C axis
Maximum capacity is 1″ diameter x 4″ long.
We have CNC turning capability with our Prodigy gang chucker with C axis
Maximum capacity is 1″ diameter x 4″ long.
We have laser welding capability with our Rofin-Baasel glovebox laser welder
Maximum capacity is 6″ x 6″ x 4″ tall..
We have plastic routing capability with our Defiance VMC.
Maximum capacity is 12″ x 7″ x 5″ tall.
We have sinker EDM capability with our Hansved CNC sinker EDM.
This machine is equipped with a Rotobore enabling precision holemaking.
Maximum capacity is 12″ x 8″ x 6″ tall..
We have wire EDM capability with our Chmer wire EDM.
This machine is equipped with a rotary B axis enabling highly complex wire EDM cutting.
Maximum capacity is 14″ x 9″ x 8″ tall.
The rotary B axis can accept work up to 5″ diameter and 8″ long.
We have surface grinding capability with our Kent surface grinder.
The machine is equipped with both a Diaform and an Optidress for precision form grinding.
It also is capable of limited cylindrical grinding.
Maximum capacity is 20″ x 10″ x 12″ tall.
Cylindrical grinding up to 3″ diameter x 6″ long.
We have manual milling capability with our Bridgeport style turret mill.
Maximum capacity is 32″ x 12″ x 12″ tall.
We have CNC milling capability with our Haas Minimill.
Maximum capacity is 16″ x 12″ x 9″ tall.
These brass collets are used to hold tube electrodes.
Implant Mechanix makes these for in-house use.
This is one of a pair of miniature punches and dies that could only be produced with the EDM process.
Both parts are extremely hard toolsteel ; over 60 Rockwell C.
The button is A-2 toolsteel hardened to 60-62 RC and still needs to be finish ground.
The openings are 0.0209″ wide.
This is the mating punch.
Die clearance is 0.0013″ total and the punches are 0.156″ long.
They were cut by wire EDM cutting an electrode, then sinker EDM cutting the punch profiles and orbiting the electrode to bring the punches to size.
© 2024 IMPLANT MECHANIX
Recent Comments